Categories
Categories
Chain Link Fence Package Kit
- Home
- PRODUCTS & FAQ
- Chain Link Fence Package Kit
Chain Link Fence Package Kit
FAQ Chain Link Fence Package Kit
SPLICING CHAIN LINK TO DETACH OR ATTACH
Q. HOW TO EASILY SEPARATE OR JOIN (SPLICE) CHAIN LINK MESH?
A. You can separate and remove the extra chain link Mesh with pliers by opening the top and bottom loops (knuckles) of a single strand of wire at any point of separation. Turn the strand counter clockwise, as it unwinds up through the links until the Mesh comes apart.
Q. HOW TO EASILY (SPLICE, ATTACH) JOIN ADDITIONAL CHAIN LINK MESH ?
Join pieces of chain-link mesh together using a single strand of wire that can be removed from end of your piece. To attach the two pieces, lay them next to each other and insert loose strand through and around the first links of both pieces, turning it clockwise as it starts weaving through both the pieces in a corkscrew style, all the way to the end of the links. Turn and tighten and secure the knuckles at top and bottom same as others. NOTE: Before sections can be attached, a second strand may have to be removed to allow similar ends to be joined together. Observe how the strands flow together in the mesh, its simple.

Q. What information do I need to buy and place the order for chain link Complete System Package?
A. All you need to know is: the height of the fence you want. The total linear(running) footage you need. And the End Posts, Corner Posts and gate Posts you need. Finally if you need any single or double gates. Thats it! See below sample layouts that show you where you need CORNER, END or GATE post. All line posts (1 every 10 ft), top rail, Chain link Mesh and hardware are included in package price per ft!( Shown in grey color)

Q. What hardware comes with the complete package?
A. The system package includes Top Rail, Mesh, 1 line post every 10 feet and all the hardware. All the hardware needed to put up chain link fence is: Loop Caps for Line Posts, Ties. Purchased separately are: End post, Gate post, and Corner post. These come with Hardware also, that's it. There is no other hardware required. Follow chart above.
Q. Do I need any other Hardware?
A. No, when you purchase the system package, all the line posts and its hardware is included. When you purchase End Post, Gate post and Corner Post all its hardware is included. So no other hardware is required. You do not need to know the parts list!
LINE POST Includes: 1 Post, 1 Loop Cap, 3 Ties.
END POST Includes: 1 Post Cap, 1 Brace Band with bolt, 1 Rail End, 1 Tension Bar 2ft-2" shorter than post height, 3 to 6 Tension Bands with Bolt based on height.
CORNER POST Includes: 1 Post Cap, 2 Brace Band with bolt, 2 Rail End, 2 Tension Bar 2ft-2" shorter than post height, 6 to 12 Tension Bands with Bolt based on height
GATE POST Includes: 1 Post Cap, 1 Brace Band with bolt, 1 Rail End, 1 Tension Bar 2ft-2" shorter than post height, 3 Tension Bands with Bolt.
Gate kit Includes: All parts to assemble gate with hardware
Q. Do I need to know what parts I need to buy?
A. No, all hardware will come with the system and the end post, Gate post and Corner posts you buy.
Q. When do I need END POST?
A. You need end post every time you are starting or ending your fence.
Q. When do I need CORNER POST?
A. You need a Corner Post every time you are making a turn in your fence line at any angle. Some very very slight angles can do without a corner post and just turns slightly around a line post.
Q. When do I need GATE POST?
A. You need 2 Gate posts for every gate. Gate post is the same as End Post. It is listed separately on item list so you can keep track of how many you need. When the gate is at the end of a fence line, you do not need the end post, as one of the gate posts also serves as the End post.