CLICK PICTURES TO ENLARGE Cantilever Gate Chain Link Fence Slide Gate, Welded with Cantilever Rollers, Includes 3 Posts and all the Hardware. Shipping Method: Motor Freight Cantilever gates are made to order in various heights and opening sizes. They are offered plain top or with barbed wire arms welded on for barbed wire systems. The actual gate size is calculated with size of the opening plus 50% for counter balance. For example, if the gate opening is 20 feet, the actual gate size will be 30 feet. Normally, the post sizes used for cantilever gates are 3" and 4" OD (outside diameter) pipe based on the opening size. Openings greater than 20 ft will have 2 4" gate posts and 3" latch posts. Gate frame has 2.375" OD pipe horizontals, and 1.660" OD pipe vertical and diagonal members. Cantilever gates are mounted on 3 posts; 2 are mounted with 4 rollers, one for each top and bottom. The 3rd post is the latch post where cantilever latch assembly is mounted for latching and locking. Also see Cantilever Gate KD KIT $1,599.00 | In GALVANIZED BLACK GREEN Color Coated over Galvanized. Barb Wire add on is Galvanized Barbed Wire for all Colors. Shipping Method: Motor Freight. Cantilever Gate Chain Link Fence Slide Gate KIT for self welding, with Cantilever Rollers. KIT includes all the components required, including posts. IT IS WELDED ON SITE at the time of installation. Cantilever gate kits are made to order in various heights and opening sizes. They are offered plain top or with barbed wire arms welded on for barbed wire systems. The actual gate length is calculated with size of the opening plus 50% for counter balance. For example, if the gate opening is 20 feet, the actual gate size will be 30 feet. The height is 6" less than the height of the fence. The Gate frame finished height for 6 ft fence is 5ft-6" allowing space for rollers on top and bottom of the posts, within the finished 6 ft height. The post sizes used for cantilever gates are 3" Gate frame has 2.375" OD pipe horizontals, and 1.660" OD pipe vertical and diagonal members. Cantilever gates are mounted on 3 posts; 2 are mounted with 4 rollers, one for each top and bottom. The 3rd post is the latch post where cantilever latch assembly is mounted for latching and locking. $599.00 |
Easy to assemble Barrier Gate Kits are low cost way to block access to a property by vehicals, cars, trucks etc. The Gate frame and braces are 1-5/8" Galvanized Tube, includes corner and center brace clamps, screws & bolts. 2 Galvanized Posts with caps are included 3" OD x 6 ft long, 2 feet can be set in cement as shown in the illustration, 4 ft rise above ground that gates mont on. 2 sets of hinges, and a commercial drop rod for each frame is included. This kit can also be welded on site if desired. $399.00 |